Mitsubishi Electronics HC7900DW Projector User Manual


  Open as PDF
of 55
 
EN-34
SIGNAL menu
R G B
R G B
SIGNAL
HORIZ. POSITION 0
VERT. POSITION 0
TRACKING 0
COMPUTER
INPUT
AUTO
FINE SYNC. 0
USER
opt.
OK
ON
HOLD
100%
OVER SCAN
SIGNAL
USER
CLAMP
POSITION
1
1
AUTO
OFF
0
LPF
VERT. SYNC
CLAMP WIDTH
opt.
SHUTTER(U)
SHUTTER(L)
SHUTTER(LS)
SHUTTER(RS)
0
0
0
ITEM SETTING FUNCTION
HORIZ. POSITION
0 - 999 Use to adjust the horizontal position of the projected image.
VERT. POSITION
0 - 999 Use to adjust the vertical position of the projected image.
FINE SYNC. 0 - 31 Use to eliminate flickering or blur, if it appears, while viewing the projected
image.
TRACKING 0 - 9999 Use to eliminate vertical wide stripes, if it appears, while viewing the
projected image.
COMPUTER INPUT
AUTO The proper setting is automatically selected.
RGB Select this option when connecting the projector to high definition video
equipment having R, G, and B output terminals.
YC
B
C
R
/YP
B
P
R
Select this option when connecting the projector to a DVD player or other
device having Y, C
B
, and C
R
(or Y, P
B
, and P
R
) component video output
terminals.
OVER SCAN 100-90% Use to adjust the display area of the projected image when playing LD and
DVD discs.
HOLD
OFF / ON
Use to adjust the image when flagging occurs near the top of the screen.
USER
OK
CLAMP POSITION
1 - 255 Use to correct solid white or solid black in the projected image.
CLAMP WIDTH 1 - 63 Use to correct solid black in the projected image.
VERT. SYNC AUTO / OFF Use to adjust the image when its motion doesn’t run smoothly. Select AUTO
for normal use.
LPF ON / OFF Use to select whether or not to enable the LPF.
SHUTTER(U) 0 - 32 Use to display the black bar on the top part of the image.
SHUTTER(L) 0 - 32 Use to display the black bar on the bottom part of the image.
SHUTTER(LS) 0 - 95 Use to display the black bar on the left half of the image.
SHUTTER(RS) 0 - 95 Use to display the black bar on the right half of the image.
• Thoughhorizontalstripsmayappearontheenlargedprojectedimage,suchsymptomisnotamalfunction.
• Whenyouchangethehorizontalorverticalpositiontoalargeextent,noisemayappear.
• Theadjustablerangeoftheverticalpositionvariesdependingonthetypeoftheinputsignal.Thoughtheimage
may stay in the same position even when the setting value is changed, such symptom is not a malfunction.
• IfyouincreasetheOVERSCANsettingwhenviewingvideosignals,noisemayappearonthescreen.Inthiscase,
decrease the OVER SCAN setting.
• Whilea3Dimageisdisplayed,OVERSCANisxedto100%.
• Whilea3Dimageisdisplayed,youcannotsetVERT.SYNCandSHUTTER.
• WhenCWSPEEDofADVANCEDMENUissetto6xintheIMAGEmenu,youcannotsetVERT.SYNC.
Menu operation (continued)
 previous next