Filter
Top Products
A - 17 A - 17
(3) To learn about data communication functions and detailed
explanations
(a) To learn about the communication functions
• Section 3.4 describes an overview of the serial communication module
functions.
(b) To learn about detailed explanations of the communication functions
• The basic communication methods are described in Chapters 5 to 7.
• Special functions are described in the User's Manual (Application).
(4) To learn about data communication functions and programming
(a) To learn how to read data from and written to the PLC CPU
• Data is read from and written to the PLC CPU with a communication
function using the MC protocol.
Details are described in the Reference Manual.
• Appendix 7 describes an overview of the communication support tool (MX
Component) that supports communication using the MC protocol.
(b) To learn how to send and receive data between the PLC CPU and the
external devices
• Data communication between the PLC CPU and the external devices is
performed with a communication function using the non procedure
protocol or the bidirectional protocol.
• Chapter 6 explains details of the communication functions and
programming using the non procedure protocol.
• Chapter 7 explains details of the communication functions and
programming using the bidirectional protocol.
(5) To learn how to check for error occurrences and take corrective
actions
Chapter 10 describes troubleshooting, how to check for errors, and detailed
explanations of error codes.
(6) To learn about functions that have been added or changed in
function version B
• Section 1.3 lists the functions that have been added or changed as well as
manuals that provide detailed explanations hereof.
• Appendix 1.1 provides a breakdown of the functions of Q series C24/GX
Configurator-SC by function version/software version.