Filter
Top Products
REV 2.4
115
4.7.2. Edit menu
4.7.2.1. Read Parameter
Used to update the software data synchronized with selected cube data (chapter
4.3.8, on page
101).
4.7.2.2. Send Parameter
Used to send current memories in the software to selected cubes. You can choose following
options.
• Only Input Parameter : Sending only input memory data
• Only Display Parameter : Sending only display memory data
• Both of Input and Display… : Sending both input and display memory data
• Only Service Parameter : Sending only system memory data
• All Parameter : Sending all memory data described above
Note: AMP GAIN (on page
52 or 59) values are not sent.
4.7.2.3. Copy Parameter
Used to copy current software memory data in selected panels to a clipboard. AMP GAIN (on
page
52 or 59) values are not included.
4.7.2.4. Paste Parameter
Used to send the memory data copied in “Copy Parameter” menu from the clipboard to selected
cubes.
4.7.2.5. Memory Copy
Used to copy a saved input or display memory data to other memory numbers or other cubes
(chapter
4.4.6, on page 111).