Mitsubishi Electronics XL50 Projector User Manual


 
REV 2.4
107
4.4.2.2. Additional items (When ANALOG or S.ANALOG is selected)
With remote control Wallaby menu Page
H.TOTAL “Sampling Number (H Total)” in “A/D Setting” 53, 61
FINE “Sampling Phase (Fine)” in “A/D Setting” 53, 58
CLAMP START “Pulse Position” in “Clamp Pulse” in “A/D Setting” window
CLAMP WIDTH “Pulse Width” in “Clamp Pulse” in “A/D Setting” window
54, 61
MASK START “Hold Start” in “PLL Hold (V-Mask)” in “A/D Setting” window
MASK END “Hold End” in “PLL Hold (V-Mask)” in “A/D Setting” window
54, 61
SYNC SELECT “Sync Select” in “A/D Setting” window 54, 62
CLOCK RANGE “Sampling Frequency Range” in “A/D Setting” window 54, 62
AUTO GAIN “Auto Adjust…” in “Amp Gain” in “A/D setting”
AMP GAIN
MANUAL GAIN “Gain” and “Level” in “Amp Gain” in “A/D setting”
52, 59
SIGNAL-TYPE “Signal Type” 62