Filter
Top Products
REV 2.4
21
1.2.7. Screen open/close (for
F
F
r
r
o
o
n
n
t
t
)
Cabling or lamp replacement, etc. requires opening the screen unit. Be careful not to trap your
fingers during the work.
The open/close should be
performed on a one-by-one basis in
a display wall so as not to shift the
center of gravity much.
In particular,
6
6
7
7
”
” may cause topple
down due to wide shifting of the
center of gravity. When you
open/close the screen units on
stand-alone cubes without fixing to
a base stand or other cubes, be
sure to use the support base which
is contained in the cube carton box.
1.2.7.1. Screen opening
Caution
About one-meter space in front of the screens
is needed for the opening. Prior to work, make
sure that there is no object such as steps in the
working space.
1.
5
5
0
0
”
”: Make sure that the two screen-fixing bolts (M6 –
45mm, gold hexagon socket) have been removed.
2. Pull the screen-drawing handles in both sides to draw the
screen till locked.
Screen-fixing bolts
Screen-drawing handle
Support base
Screen unit
Cube unit