Filter
Top Products
ND-70185 (E) CHAPTER 8
Page 175
Revision 3.0
EX- FCCS
EX-FCCS Features
3. EX-FCCS Features
3.1 Number Portability
[Operating Procedure]
1. Log in to the NCN of the Center FUG from the Centralized-MAT for EX-FCCS.
2. Assign the Telephone Number data using AELGN command. The new data is automatically copied to
the NDM in the self-FUG and the other FUG in an EX-FCCS network. AELGN command is also
used to delete or change Telephone Number data in addition to assignment.
Note 1:
AELGN command is used to operate Number Portability for Telephone Numbers used in NEAX2400 IMX
systems. For the NEAX2000 IVS
2
system, several commands are required for assignment. For details, see
related NEAX2000 IVS
2
manuals.
Note 2:
When logging in to the node other than the NCN of the Center FUG (LN in Center FUG or LN/NCN in
other FUGs), only reading out the AELGN command data is available.
Note 3:
If the center FUG group is not “0” and FUG no.“0” is assigned to another group, AELGN command data
assignment is available for the node to be logged in only.
[Service Conditions]
1. A closed numbering network is recommended for numbering plan of the EX-FCCS network.
2. Only Telephone Number (max. 8 digits) is allowed for the extension number used in an EX-FCCS
network.