Filter
Top Products
CHAPTER 5 ND-70185 (E)
Page 64
Revision 3.0
DATA PROGRAMMING
Assignment of System Data
Index 800
For ASYDL b0 : 0/1 = ALGNL, ALGSL on a UGN (TN) basis/-
b1 : 0/1 = ASPAL on a TN basis/-
b2 : 0/1 = ANPDL on a TN basis/-
b4 : 0/1 = AFRSL, ASTPL, AUNEL on a TN basis/-
b5 : 0/1 = ASTPL on a TN basis/-
b7 : 0/1 = AAEDL on a TN basis/-
For ASYDN b0 : 0/1 = ALGNN, ALGSN on a UGN (TN) basis/-
b1 : 0/1 = ASPAN on a TN basis/-
b2 : 0/1 = ANPDN on a TN basis/-
b4 : 0/1 = AFRSN, ASTPN on a TN basis/-
b5 : 0/1 = ASTPN on a TN basis/-
b6 : 0/1 = ARSCN on a TN basis/-
b7 : 0/1 = AAEDN on a TN basis/-
When “different numbering development on a TN basis ” is not required, set the above bits.
Figure 5-7 ASYDN Command Display (example)
Note 4:
Be sure to execute “Non-Load Initial” after setting the FPC data. The assigned FPC becomes effective by
this operation.
1
This figure shows the display of the ASYDN command Index 514 as an example.