Filter
Top Products
WT600 User’s Manual Supplement
This document provides updated information that supplements the WT600 User’s Manual. Read this supplement as well as the
User's Manual.
1
Correction to “What’s in the Box?”
Although a Quick Connect Guide is shown on page iii of the user’s manual, the WT600 SETUP GUIDE is actually included with
the projector.
First read the WT600 SETUP GUIDE before operating the projector.
2
Change in [3D Reform] Operation
The procedures in the user's manual are different from the actual operation. See the correct procedures below.
(1) Change in layout of menu items (page 6-3 of the user’s manual)
The menu options in 3D Reform has been changed to:
Cornerstone
Keystone Horizontal, Vertical
Pincushion Horizontal, Vertical,
Balance (Vertical)
Pincushion Left/Right, Top, Bottom
Cornerstone
Keystone Horizontal, Vertical
Ȩ
[User’s manual] [Actual menu display]
With this change, the order in displaying adjustment screens is the same order as the above when the 3D REFORM button
on the remote control is pressed: Pincushion → Cornerstone → Keystone → Pincushion→ ... (page 1-4 and 1-7 of the user’s
manual)
(2) Change in [Pincushion] operation (page 6-13 of the user’s manual)
The procedures for [Pincushion] correction is changed as:
Pincushion
[Left/Right]
Correct the left and right side on a projected image to level as shown in the drawing.
Screen (solid line)
Projected area (dotted line)
[Top]
Correct the top side on a projected image to level as shown in the drawing.
Screen (solid line)
Projected area (dotted line)
Continued on the next page.