Filter
Top Products
2-6
PC CARD
AUDIO IN
R
L
/MONO
VIDEO IN
S-VIDEO IN DVI-I IN
RGB IN RGB OUT
DVI-I RGB
AUDIO INUSB AUDIO OUT
PCCONTROL
REMOTE
IN
AUDIO IN
LR
AUDIO OUT
L R
Component
YCbCr
AUDIO IN RGB
RGB IN
Connecting Your DVD Player
You can connect your projector to a DVD player with component
output or Video output. To do so, simply:
1. Turn off the power to your projector and DVD player.
2. If your DVD player has the component video (Y,Cb,Cr) output,
use a commercially available component video cable (RCAX3)
and the optional 15-pin-to-RCA (female)
ן
3 cable to connect
your DVD player to the RGB IN connector on the projector.
For a DVD player without component video (Y,Cb,Cr) output,
use common RCA cables (not provided) to connect a com-
posite VIDEO output of the DVD player to the Video Input of
the projector.
3. Turn on the projector and DVD player.
NOTE: Refer to your DVD player's owner's manual for more informa-
tion about your DVD player's video output requirements.
Audio cable (not supplied)
Audio Equipment
DVD player
Component video RCA
ן
3 cable
(not supplied)
Optional 15-pin-to-RCA
(female)
ן
3 cable (ADP-CV1)
2. Installation and Connections