NEC WT600 Projector User Manual


 
4-5
4. Convenient Features
4-10 USB Memory Device or USB
Memory Card Reader Support
The projector is compatible with either a USB memory device or
USB memory card reader which supports the viewer and secu-
rity features.
To use a USB memory device or USB memory card reader,
connect the device to the USB port (type A).
Select one of the Drive icons in the Viewer toolbar, Capture
toolbar and PC Card File setting screen. Up to four drives can
be accepted.
To use a USB memory device as a Protect key for Security
function, select one from the Drive icons in the Security set-
ting screen.
NOTE:
Some USB memory devices (brands) or USB memory card read-
ers may not work.
You cannot use a USB memory device and a USB memory card
reader when connecting a USB mouse to the projector.
Using a USB HUB that allows multiple USB memory devices or
card readers is not supported either.
Do not do the following while the USB memory device or USB
memory card reader’s access indicator is lit or flashing (while data
is being accessed.) Doing so can damage your USB memory de-
vice or USB memory card in the reader. Back up your data in case
it will need to be restored.
* Pulling out the USB memory device or USB memory card reader
from the USB port of the projector.
* Pulling out the memory card from the USB memory card reader
* Turning off the main power switch or unplugging the power
cable.
The drive for “USB 1-4” is displayed only when the USB memory
device or USB memory card reader is connected to the projector.
The drive for “USB 1-4” may be displayed differently from the one
in the USB memory card reader.
Some USB memory devices (brands) or USB memory cards can-
not be used as Protect key for the projector’s Security function.