Filter
Top Products
www.netcomm.com.au Rev. 1- YML709
Page 26 NB1300Plus4 ADSL Modem
ADSL Gateway
Router - Ethernet
Step 2: Configuring the NB1300Plus4 Wireless
After connecting all the ADSL Router cables you can either configure your NB1300Plus4
Wireless using the Easy Config software provided or complete the following manual
configuration instructions:
a. After connecting all the ADSL Router cables, powering on the ADSL Router, and launching a
web browser, such as Internet Explorer or Netscape Navigator, browse to the address http://
192.168.1.1.
b. Enter the correct user name and password to access the Configuration tool. The default user
name and password are as below.
User Name : admin
Password : password
Note: You must click the Submit button on every page that you make changes on and
when you have made all your changes click the Save Setting and Reboot button
from the bottom of the menu.
c. Click on the One Page Setup link under the Basic menu. You do not need to change the
LAN settings unless you need the NB1300Plus4 Wireless to work with an existing network
on a subnet other than 192.168.1.x.
You will need to Change your WAN and VC settings as provided by your ISP. The following
lists an example of the most common ISP settings used in Australia. The only fields that
require changing from the default settings are highlighted.