Rev. 1 - YML709 www.netcomm.com.au
NB1300Plus4 Wireless ADSL Modem Page 33
ADSL Gateway
Router - USB
Field Setting Details
Service name: Any name to describe your ISP.
User Name: Your ISP will provide a case sensitive User Name in a
format similar to your email address. Contact your ISP
for details.
Password: Enter your Password as supplied by your Service
Provider (characters are usually all lower case).
Disconnect timeout: 0 ❖
Mode/Wan Connection Type: PPPoE LLC or PPPoA
VPI: 8 ❖
VCI: 35 ❖
Static IP Address: 192.168.241.101❖
Subnet Mask: 255.255.255.0❖
Default Gateway: 0.0.0.0 ❖
Bridge mode: Disabled ❖
❖
Default Setting. Although in most cases you will not be required to alter these
default settings for your NB1300Plus4 Wireless, your ISP may identify specific
settings to enable connection to their service. Please refer to your ISP or Network
Administrator for further information.
d. Click Submit and then click the Save Setting and Reboot button from the bottom of the
menu. Wait for the configuration to complete.
Step 3: Configuring your Computer to use the NB1300Plus4 Wireless
Most applications call for the Primary and Secondary DNS server entries to be made on each
computer. These can be automatically assigned by another DHCP server or by enabling the
DHCP server on the NB1300Plus4 Wireless ADSL Modem, and entering the DNS values in the
DNS section of the NB1300Plus4 Wireless.