www.netcomm.com.au Rev. 1- YML709
Page 86 NB1300Plus4 ADSL Modem
Advanced
Save Settings and Reboot
The Save Settings and Reboot button allows the user to save the new configuration to the flash
and reboot the system.
After making changes on any of the configuration pages, click the “Submit” button at the bottom
of the page to save the changes.
When you have finished making all the changes required in all pages, the new settings need to be
saved into the flash, so it is necessary to go to the Save Settings page to save and reboot the
system for the changes to be taken effect. After the Save and Reboot, you will be returned to
the onepage setup.
Note: DO NOT power the unit off or press the reset button again during the reboot process.