NetComm NB1300 Plus 4W Network Router User Manual


 
www.netcomm.com.au Rev. 1- YML709
Page 24 NB1300Plus4 ADSL Modem
ADSL Gateway
Router - Ethernet
ADSL Gateway Router - Ethernet Configuration
Use this configuration if you:
Have been told to use Easy Config “ISP Profile 1, 2, 3, 5 or 6 ”, or
Were told by your ISP to use this Configuration with another Easy Config profile, or
Have at least one computer with an Ethernet Networking socket, and / or
Want to share your Internet Service with more than one computer.
Want your computers to be protected by the NB1300Plus4 Wireless (via NAT and
Firewall).
You want your computers to use Private IP addresses.
Ethernet Gateway (performing Network Address Port Translation) - This is when the
NB1300Plus4 Wireless is connected to your network switch or hub and shares the Internet
connection to all computers on the network. The NB1300Plus4 Wireless will log on to your ISP
on behalf of your computers and it will shield your computers from direct Internet attack by
using Network Address Translation (NAT).