Filter
Top Products
Rev. 1 - YML709 www.netcomm.com.au
NB1300Plus4 Wireless ADSL Modem Page 87
Appendix A - Connection Instructions
Connect your NB1300Plus4 Wireless ADSL Modem via Ethernet
1. Connect your NB1300Plus4 Wireless to either a computer directly or a network hub or
switch using cat5 ethernet cables. You need to ensure you are using the correct type of
ethernet cable - i.e. straight through or crossover.
2. Connect the power pack to the NB1300Plus4 Wireless ADSL Modem and switch on the
power switch.
3. Ensure that the connected port has a LAN led light on the NB1300Plus4 Wireless.
4. Ensure that the computer you intend to use has an IP address in the same subnet as the
NB1300Plus4 Wireless ADSL Modem. (e.g. the NB1300Plus4 Wireless’s default IP is
192.168.1.1 - your computer should be on 192.168.1.100 or similar.) If you have DHCP
enabled on your computer, the NB1300Plus4 Wireless will assign your computer a suitable
IP address.
5. Ensure that your computer has a LAN link light.
6. Connect one end of the ADSL phone line to the NB1300Plus4 Wireless ADSL Modem and
the other end to the wall socket.
7. Additional network devices or computers can be connected to the remaining LAN ports.