Filter
Top Products
www.netcomm.com.au Rev. 1- YML709
Page 30 NB1300Plus4 ADSL Modem
ADSL Gateway
Router - USB
ADSL Gateway Router - USB Configuration
Use this configuration if you:
■ Have been told to use Easy Config “ISP Profile 1, 2, 3, 5 or 6 ”, or
■ Were told by your ISP to use this Configuration with another Easy Config profile.
■ Wish to use the NB1300Plus4 Wireless with a computer that does not have an Ethernet
socket. This computer will use a Private IP address and will be protected from the Internet
by the NB1300Plus4 Wireless (via NAT).
■ Already use the NB1300Plus4 Wireless with an Ethernet network but wish to connect a
Computer that does not have an Ethernet socket. (You do not need to reconfigure the
NB1300Plus4 Wireless please refer to the “Connecting your NB1300Plus4 Wireless via
USB cable” section in this guide)
USB Gateway Configuration (Multiple public IPs to Multiple internal IPs) - If you do not
have an Ethernet port on your computer you can use your USB port like an Ethernet port to
connect to the NB1300Plus4 Wireless. This "simulated" Ethernet port is only for connecting to
the NB1300Plus4 Wireless and is only available for Windows 98SE, Windows 2000, Windows
XP and machintosh OSX.. The NB1300Plus4 Wireless will log on to your ISP on behalf of your
computer and it will shield your computer from Internet attack by using NAT.