NETGEAR DG834G Network Router User Manual


 
Reference Manual for the 54 Mbps Wireless ADSL Firewall Router DG834G
3-16 Connecting the Router to the Internet
202-10006-01
How to Perform Manual Configuration
We recommend that you start the manual configuration from the Setup Wizard:
1. Select your country and language. Language choices are English, French, German, and Italian.
After you change the language, the remaining setup screens change to the language of your
choice.
2. Select No to manually configure your router connection.
3. Click Next.
4. Manually configure the router in the Basic Settings menu shown in Figure 3-15.
5. Follow the instructions below according to the encapsulation method and whether your
Internet connection requires a login. The following methods are available:
Internet Connection Requires Login and Uses PPPoE
Internet Connection Requires Login and Uses PPPoA
Internet Connection Does Not Require a Login
6. Usually the default ADSL Settings work fine for most ISPs and you can skip this step. If you
have any problems with your connection, check the ADSL Settings. See “ADSL Settings” on
page 3-19 for more details.
Internet Connection Requires Login and Uses PPPoE
1. If your Internet connection does require login, select Yes and fill in the settings according to
the instructions below.
Note: You will no longer need to launch the ISP’s login program on your computer in order to
access the Internet. When you start an Internet application, your router automatically logs you
in.
2. Choose PPPoe for the encapsulation method your ISP uses.
3. Enter the login name (frequently the email address your ISP provided), password, and service
name (if required).
4. If you want to change the login timeout, enter a new value in minutes. This determines how
long the router keeps the Internet connection active after there is no Internet activity from the
LAN. Entering an Idle Timeout value of zero means never log out.
5. The DNS server is used to look up site addresses based on their names.