Filter
Top Products
Switching Commands
106
ProSafe M4100 and M7100 Managed Switches
A port-channel (LAG) interface can be either static or dynamic, but not both. All members of a
port channel must participate in the same protocols.) A static port-channel interface does not
require a partner system to be able to aggregate its member ports.
Note: If you configure the maximum number of dynamic port-channels
(LAGs) that your platform supports, additional port-channels that you
configure are automatically static.
addport
This command adds one port to the port-channel (LAG). The interface is a logical slot/port
number or a group ID of a configured port-channel.
Note: Before adding a port to a port-channel, set the physical mode of the
port. For more information, see speed on page 24.
deleteport (Interface Config)
This command deletes the port from the port-channel (LAG). The interface is a logical
slot/port number or a group ID of a configured port-channel.
Format deleteport {<logical slot/port>|lag <lag-group-id>}
Mode
deleteport (Global Config)
This command deletes all configured ports from the port-channel (LAG). The interface is a
logical slot/port number of a configured port-channel. To clear the port channels, see clear
port-channel on page 549
Format deleteport <logical slot/port>
Mode
.
Format addport {<logical slot/port>|lag <lag-group-id>}
Mode
Interface Config
Interface Config
Global Config