NETGEAR M4100-12G-POE+ Switch User Manual


 
Routing Commands
293
ProSafe M4100 and M7100 Managed Switches
show ip ospf asbr
This command displays the internal OSPF routing table entries to Autonomous System
Boundary Routers (ASBR). This command takes no options.
Format show ip ospf asbr
Mode
• Privileged EXEC
• User EXEC
Type
Router ID
Cost
Area ID
Next Hop
Next Hop Intf
show ip ospf database
This command displays information about the link state database when OSPF is enabled. If
you do not enter any parameters, the command displays the LSA headers for all areas. Use
the optional <areaid> parameter to display database information about a specific area. Use
the optional parameters to specify the type of link state advertisements to display.
Term Definition
The type of the route to the destination. It can be one of the following values:
intra — Intra-area route
inter — Inter-area route
Router ID of the destination.
Cost of using this route.
The area ID of the area from which this route is learned.
Next hop toward the destination.
The outgoing router interface to use when forwarding traffic to the next hop.
Parameter Description
asbr-summary
Use asbr-summary to show the autonomous system boundary router (ASBR) summary
LSAs.
external
Use external to display the external LSAs.
network
Use network to display the network LSAs.
nssa-external
Use nssa-external to display NSSA external LSAs.
opaque-area
Use opaque-area to display area opaque LSAs.
opaque-as
Use opaque-as to display
AS opaque LSAs.
opaque-link
Use opaque-link to display link opaque LSAs.
router
Use router to display router LSAs.
summary
Use summary to show the LSA database summary information.