Filter
Top Products
Routing Commands
250
ProSafe M4100 and M7100 Managed Switches
ip vrrp mode
This command enables the virtual router configured on the specified interface. Enabling the
status field starts a virtual router. The parameter <vrid> is the virtual router ID which has an
integer value ranging from 1 to 255.
Default
Format ip vrrp <vrid> mode
Mode
no ip vrrp mode
This command disables the virtual router configured on the specified interface. Disabling the
status field stops a virtual router
.
Format no ip vrrp <vrid> mode
Mode
ip vrrp ip
This command sets the virtual router IP address value for an interface. The value for
<ipaddr> is the IP address which is to be configured on that interface for VRRP. The
parameter <vrid> is the virtual router ID which has an integer value range from 1 to 255.
You can use the optional [secondary] parameter to designate the IP address as a
secondary IP address.
Default
Format ip vrrp <vrid> ip <ipaddr> [secondary]
Mode
no ip vrrp ip
Use this command in Interface Config mode to delete a secondary IP address value from the
interface.
To delete the primary IP address, you must delete the virtual router on the
interface.
Format no ip vrrp <vrid> <ipaddress> secondary
Mode
ip vrrp authentication
This command sets the authorization details value for the virtual router configured on a
specified interface, The parameter {none | simple} specifies the authoritization type for
virtual router configured on the specified interface. The parameter {key} is optional, it is only
disabled
Interface Config
Interface Config
none
Interface Config
Interface Config