NETGEAR M4100-12G-POE+ Switch User Manual


 
Switching Commands
145
ProSafe M4100 and M7100 Managed Switches
the given VLAN list. The global configuration includes the source mac validation,
destination mac validation, and invalid IP validation information.
Format show ip arp inspection [vlan <vlan-list>]
Mode
• Privileged EXEC
• User EXEC
Example: The following shows example CLI display output for the command.
(Switch) #show ip arp inspection vlan 10-12
Source Mac Validation : Disabled
Destination Mac Validation : Disabled
IP Address Validation : Disabled
Vlan Configuration Log Invalid ACL Name Static flag
---- ------------- ----------- --------- ----------
10 Enabled Enabled H2 Enabled
11 Disabled Enabled
12 Enabled Disabled
show ip arp inspection statistics
Use this command to display the statistics of the ARP packets processed by Dynamic ARP
Inspection. Give the vlan-list argument and the command displays the statistics on all
DAI-enabled VLANs in that list. Give the single vlan argument and the command displays the
statistics on that VLAN. If no argument is included, the command lists a summary of the
forwarded and dropped ARP packets.
Format show ip arp inspection statistics [vlan vlan-list]
Mode
• Privileged EXEC
• User EXEC
Term Definition
Source MAC
Validation
Displays whether Source MAC Validation of ARP frame is enabled or disabled.
Destination
MAC Validation
Displays whether Destination MAC Validation is enabled or disabled.
IP Address
Validation
Displays whether IP Address Validation is enabled or disabled.
VLAN
The VLAN ID for each displayed row.
Configuration
Displays whether DAI is enabled or disabled on the VLAN.
Log Invalid
Displays whether logging of invalid ARP packets is enabled on the VLAN.
ACL Name
The ARP ACL Name, if configured on the VLAN.
Static Flag
If the ARP ACL is configured static on the VLAN.