Filter
Top Products
Switching Commands
203
ProSafe M4100 and M7100 Managed Switches
MAC Database Commands
This section describes the commands you use to configure and view information about the
MAC databases.
bridge aging-time
This command configures the forwarding database address aging timeout in seconds. The
<seconds> parameter must be within the range of 10 to 1,000,000 seconds.
Default
Format bridge aging-time <10-1,000,000>
Mode
Max ICMPv4 Pkt
Size
The range is 0-1023.
The factory default is 512.
Max ICMPv6 Pkt
Size
The range is 0-16384. The factory default is 512.
ICMP Fragment
Mode
May be enabled or disabled. The factory default is disabled.
L4 Port Mode
May be enabled or disabled. The factory default is disabled.
TCP Port Mode
May be enabled or disabled. The factory default is disabled.
UDP Port Mode
May be enabled or disabled. The factory default is disabled.
SIPDIP Mode
May be enabled or disabled. The factory default is disabled.
SMACDMAC
Mode
May be enabled or disabled. The factory default is disabled.
TCP Flag Mode
May be enabled or disabled. The factory default is disabled.
TCP FIN&URG&
PSH Mode
May be enabled or disabled. The factory default is disabled.
TCP Flag &
Sequence Mode
May be enabled or disabled. The factory default is disabled.
TCP SYN Mode
May be enabled or disabled. The factory default is disabled.
TCP SYN & FIN
Mode
May be enabled or disabled. The factory default is disabled.
TCP Fragment
Mode
May be enabled or disabled. The factory default is disabled.
TCP Offset
Mode
May be enabled or disabled. The factory default is disabled.
300
Global Config
Term Definition