Filter
Top Products
Switching Commands
121
ProSafe M4100 and M7100 Managed Switches
show port-channel system priority
Use this command to display the port-channel system priority.
Format show port-channel system priority
Mode
Port Mirroring
Port mirroring, which is also known as port monitoring, selects network traffic that you can
analyze with a network analyzer, such as a SwitchProbe device or other Remote Monitoring
(RMON) probe.
monitor session
This command configures a probe port and a monitored port for monitor session (port
monitoring). Use the source interface <slot/port> parameter to specify the interface
to monitor. Use rx to monitor only ingress packets, or use tx to monitor only egress packets.
If you do not specify an {rx | tx} option, the destination port monitors both ingress and
egress packets. Use the destination interface <slot/port> to specify the interface
to receive the monitored traffic. Use the mode parameter to enabled the administrative mode
of the session. If enabled, the probe port monitors all the traffic received and transmitted on
the physical monitored port.
Format monitor session <session-id> {source interface <slot/port> [{rx |
tx}] | destination interface <slot/port> | mode}
Mode
Type
The status designating whether a particular port-channel (LAG) is statically or
dynamically maintained.
• Static - The
port-channel is statically maintained.
• Dynamic - The
port-channel is dynamically maintained.
Mbr Ports
A listing of the ports that are members of this port-channel (LAG), in slot/port notation.
There can be a maximum of eight ports assigned to a given port-channel (LAG).
Device Timeout
For each port, lists the timeout (long or short) for Device
Type (actor or partner).
Port Speed
Speed of the port-channel port.
Ports Active
This field lists the ports that are actively participating in the port-channel (LAG).
Load Balance
Option
The load balance option associated with this LAG. See port-channel load-balance on
page 1
17.
Local
Preference
Mode
Indicates whether the local preference mode is enabled or disabled.
Privileged EXEC
Global Config
Term Definition