Filter
Top Products
Switching Commands
87
ProSafe M4100 and M7100 Managed Switches
If you do not use the optional parameters <slot/port> or <vlanid>, the command
displays the global dot1x mode, the VLAN Assignment mode, and the Dynamic VLAN
Creation mode.
Administrative
Mode
VLAN
Assignment
Mode
Dynamic VLAN
Creation Mode
Monitor Mode
If you use the optional parameter summary {<slot/port> | all}, the dot1x
configuration for the specified port or all ports are displayed.
Interface
Control Mode
Operating
Control Mode
Reauthenticatio
n Enabled
Port Status
If you use the optional parameter 'detail <slot/port>', the detailed dot1x configuration
for the specified port is displayed.
Term Definition
Indicates whether authentication control on the switch is enabled or disabled.
Indicates whether assignment of an authorized port to a RADIUS assigned VLAN is
allowed (enabled) or not (disabled).
Indicates whether the switch can dynamically create a RADIUS-assigned VLAN if it does
not currently exist on the switch.
Indicates whether the Dot1x Monitor mode on the switch is enabled or disabled.
Term Definition
The interface whose configuration is displayed.
The configured control mode for this port. Possible values are force-unauthorized |
force-authorized | auto | mac-based | authorized | unauthorized.
The control mode under which this port is operating. Possible values are authorized |
unauthorized.
Indicates whether re-authentication is enabled on this port.
Indicates whether the port is authorized or unauthorized. Possible values are authorized
| unauthorized.
Term Definition
Port
The interface whose configuration is displayed.
Protocol Version
The protocol version associated with this port. The only possible value is 1,
corresponding to the first version of the dot1x specification.
PAE Capabilities
The port access entity (PAE) functionality of this port. Possible values are Authenticator
or Supplicant.
Control Mode
The configured control mode for this port. Possible values are force-unauthorized |
force-authorized | auto | mac-based.
Authenticator
PAE State
Current state of the authenticator PAE state machine. Possible values are Initialize,
Disconnected, Connecting,
Authenticating, Authenticated, Aborting, Held,
ForceAuthorized, and ForceUnauthorized. When MAC-based authentication is enabled
on the port, this parameter is deprecated.