Filter
Top Products
NETGEAR ProSafe 802.11g Wireless Access Point WG302v2 Reference Manual
Command Line Reference C-19
v1.0, May 2006
Advanced Access Point Settings
The commands in Table C-17 correspond to the Access Point Settings page on the Web UI under
the Advanced heading.
Table C-17 Advanced Access Point Settings
Task Command
Enable Wireless Bridging and
Repeating
set interface wlan0wds0 status up
set interface wlan0wds0 radio wlan0
Disable Wireless Bridging and
Repeating
set interface wlan0wds0 status down
View the Local MAC Address for the
Wireless Bridge or Repeater
get interface wlan0wds0 mac
Set the Remote MAC Address 1 set interface wlan0wds0 remote-mac
<remote_MAC_address>
Set the Remote MAC Address 2 set interface wlan0wds1 remote-mac
<remote_MAC_address>
Set the Remote MAC Address 3 set interface wlan0wds2 remote-mac
<remote_MAC_address>
Set the Remote MAC Address 4 set interface wlan0wds3 remote-mac
<remote_MAC_address>