Filter
Top Products
NETGEAR ProSafe 802.11g Wireless Access Point WG302v2 Reference Manual
C-16 Command Line Reference
v1.0, May 2006
Configuring Advanced IP Settings
The commands in Table C-14 correspond to the IP Settings page on the Web UI under the
Advanced heading.
Save the list of Known APs
set known-ap-list action export
config-file <file_name> config-server
<tftp_server>
Example:
set known-ap-list action export
config-file wg302Rogue3.cfg
config-server tftp://192.168.24.10/
knownAP
Import a list of known APs
set known-ap-list action import
config-file <file_name>
config-server <tftp_server>
Example:
set known-ap-list action export
config-file wg302Rogue3.cfg
config-server tftp://
192.168.24.10/knownAP
Table C-14 Advanced IP Setting s
Task Command
View all DHCP server information
get dhcp-server detail
Enable the DHCP Server
set dhcp-server status up
Disable the DHCP Server
set dhcp-server status down
Set the Starting IP Address
set dhcp-server ipstart <ip_address>
Set the Ending IP Address
set dhcp-server ipend <ip_address>
Set the Subnet Mask
set dhcp-server netmask <subnet_mask>
Set the Gateway IP Address
set dhcp-server gateway <ip_address>
Set the Primary DNS Server
set dhcp-server dns1 <ip_address>
Table C-13 AP Information (continued)
Task Command