Filter
Top Products
NETGEAR ProSafe 802.11g Wireless Access Point WG302v2 Reference Manual
Command Line Reference C-9
v1.0, May 2006
Configuring Security Profile Settings
You can configure up to eight security profiles on the AP. Table C-8 maps the Web UI security
profile for wlan0 to the profile name in the CLI.
Configure the Wireless Network
Name (SSID)
set interface wlan0 ssid <ssid_name>
Example:
set interface wlan0 ssid test_lab
Allow SSID Broadcasts
set bss wlan0bssvap0 ignore-broadcast-ssid off
Deny SSID Broadcasts
set bss wlan0bssvap0 ignore-broadcast-ssid on
Set the Wireless Mode
set radio wlan0 mode g
set radio wlan0 mode b
Set the Channel/Frequency Not permitted
Set the Data Rate
get supported-rate wlan0
add supported-rate wlan0 <rate>
remove supported-rate wlan0 <rate>
Set the Output Power
set radio wlan0 tx-power <percent>
Table C-8 Security Profile Interface Names
Web UI Security Profile Default Profile Name CLI Name
Profile 1 NETGEAR vap0
Profile 2 NETGEAR-1 vap1
Profile 3 NETGEAR-2 vap2
Profile 4 NETGEAR-3 vap3
Profile 5 NETGEAR-4 vap4
Profile 6 NETGEAR-5 vap5
Profile 7 NETGEAR-6 vap6
Profile 8 NETGEAR-7 vap7
Table C-7 Wireless Setting (continued)s
Task Command