Filter
Top Products
NETGEAR ProSafe 802.11g Wireless Access Point WG302v2 Reference Manual
1-6 Introduction
v1.0, May 2006
Rear Panel
The numbers in Figure 0-2 correspond to the following features on the back of the WG302v2:
1. Primary and Secondary 2.4 GHz detachable antennas.
2. Reset button. This restores the default factory settings.
3. Serial Console Port. Use the male DB-9 serial port for serial DTE connections.
4. RJ-45 Ethernet LAN/POE Port. Use the WG302v2 Ethernet RJ-45 port to connect to an
Ethernet LAN through a device such as a hub, switch, router, or Power Over Ethernet (POE)
switch.
5. Power socket. This connects to the WG302v2 power adapter.
802.11g WLAN Wireless LAN Link Activity Indicator (2.4 MHz)
Off No wireless link activity.
Green Blink Wireless link activity.
Figure 0-2
LED Description
1
2
5
3 4
1
1