Filter
Top Products
NETGEAR ProSafe 802.11g Wireless Access Point WG302v2 Reference Manual
2-14 Basic Installation and Configuration
v1.0, May 2006
3. Select the Security Profile to configure and click Edit.
The Security Profile Configuration page appears, as shown below.
4. Enter the settings for the Security Profile, which are described on the following page.
5. To update the settings, click Apply.
Figure 2-7
Note: If you use a wireless computer to configure Security Profile settings, and if
your computer uses the Security Profile that you change, you will be
disconnected when you click Apply. Reconfigure your wireless adapter to
match the new settings or access the wireless access point from a wired
computer to make any further changes.
Selected
Security Profile