Filter
Top Products
NETGEAR ProSafe 802.11g Wireless Access Point WG302v2 Reference Manual
B-4 Specifications
v1.0, May 2006
Specifications for the WG302v2
The following table describes the WG302v2 technical specifications.
Table B-2 WG302v2 Technical Specifications
Parameter ProSafe 802.11g Wireless Access Point
Network Management Web-based configuration and status monitoring
Maximum Clients Limited by the amount of wireless network traffic generated by each node;
typically 30 to 70 nodes.
Status LEDs Power/Ethernet LAN/Wireless LAN/Test
Power Adapter 12V DC, 1.2 A
Electromagnetic Compliance FCC Part 15 Class B and Class E, CE and C-Tick
Environmental Specifications Operating temperature: 0 to 50° C
Operating humidity: 5-95%, non-condensing
Data Encoding: 802.11b: 1 and 2 Mbps, Direct Sequence Spread Spectrum (DSSS)
802.11b: 5.5 and 11 Mbps, Complementary Code Keying (CCK)
802.11g: All rates, Orthogonal Frequency Division Multiplexing (OFDM)
Maximum Computers Per
Wireless Network:
Limited by the amount of wireless network traffic generated by each node.
Typically 10-40 nodes.
802.11b/g Radio Data Rate 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54, and 108 Mbps (Auto-rate capable)
802.11b and g
Operating Frequencies
2.412 ~ 2.462 GHz (US) 2.457 ~ 2.462 GHz (Spain)
2.412 ~ 2.484 GHz (Japan) 2.457 ~ 2.472 GHz (France)
2.412 ~ 2.472 GHz (Europe ETSI)
802.11g Encryption 40-bits (also called 64-bits), 128- and 152-bits WEP data encryption
Antenna Two (2) external 5 dBi 2.4 GHz detachable antennas