Filter
Top Products
NETGEAR ProSafe 802.11g Wireless Access Point WG302v2 Reference Manual
C-8 Command Line Reference
v1.0, May 2006
Configuring Wireless Settings
The commands in Table C-7 correspond to the Wireless Settings page on the Web UI.
Set the Primary DNS Server
set host static-dns-1 <ip_address>
Example:
set host static-dns-1 10.10.3.10
Set the Secondary DNS Server
set host static-dns-2 <ip_address>
Enable Spanning Tree Protocol
set interface brvlan1 stp on
Disable Spanning Tree Protocol
set interface brvlan1 stp off
Set the Management VLAN ID
set management vlan-id <1-4096>
Enable Untagged VLANs and set
the VLAN ID
set untagged-vlan untagged-vlan-id <1-4096>
Set the Time Zone
set ntp timezone <timezone>
Enable the NTP Server
set ntp status up
Disable the NTP Server
set ntp status down
Use a custom NTP server
set ntp use-default-servers off
Use the default NTP server
set ntp use-default-servers on
Set the Hostname or IP Address
for the custom NTP server
Note: You can set a primary and
secondary NTP server.
set ntp-servers [primary | secondary] server
[<hostname> | <ip_address>]
Example:
set ntp-serves primary ntp.foo.com
or
set ntp-servers primary server 192.168.1.10
View the Current Time
date
Table C-7 Wireless Setting s
Task Command
Turn on the Radio
set interface wlan0 status up
Turn off the Radio
set interface wlan0 status down
Table C-6 Basic Setting (continued)s
Task Command