Filter
Top Products
Management
DRAFT
E Copyright Nokia Telecommunications Oy
NTC C33539002SE_A0
5-67
Command Enable proxy ARP function on channels using PPP
over ATM encapsulation in bridged mode
Description Specifies whether you want the Nokia M10 to act as a
proxy address resolution server for your PC for the IP
addresses behind the specified ATM link using PPP
over ATM encapsulation in bridged mode.
Syntax set ip wan {vccx} proxy-arp [on|off]
Arguments The first argument identifies the ATM channel (vccx, x =
1 ... 8). If there is only one ATM channel using ppp-
vcmux encapsulation you can leave the argument vccx
out. The second argument is enables/disables proxy
ARP function.
Example set ip wan vcc2 proxy-arp on
Command Enable/disable RIP send function on channels
using PPP over ATM encapsulation in bridged mo-
de
Description Specifies whether the Nokia M10 should use Routing
information protocol (RIP) broadcasts to advertise its
routing tables to router on the other side of the speci-
fied ATM link using PPP over ATM encapsulation in
bridged mode (BNCP option on).
Syntax set ip wan {vccx} rip-send [off | v1 | v2 | v1-compat]
Arguments The first argument identifies the ATM channel (vccx, x =
1 ... 8). If there is only one ATM channel using PPP
over ATM encapsulation in bridged mode you can leave
the argument vccx out. Both RIP version 1 and RIP
version 2 functionalities can be simultaneously acti-
vated. v1-compat argument enables the sending of
RIPv2 packets using IP multicast. RIP cannot be acti-
vated if address mapping is ON.
Example m10> set ip wan vcc2 rip-send off