Filter
Top Products
Management
DRAFT
E Copyright Nokia Telecommunications Oy
NTC C33539002SE_A0
5-5
PAP and CHAP Setup settings
If a password has been assigned to your M10 PAP and CHAP Setup
page will appear when you enter your M10 username and password
and click OK.
On this page you can enable/disable PAP/CHAP and enter the
corresponding usernames and passwords. By clicking the Pinhole link
you can go to the NAT Pinhole page and configure pinhole settings.
Monitor link takes you to the Monitor page where you can monitor the
performance of your M10.
Figure 5-4 PAP and CHAP Setup page
PPP Connection Manager settings
You can set the username and password for each PPP connection you
have configured. Select the PPP connection you want to modify from
the option menu. Press Get values to modify username and password
of the connection. Press Reload to restart the PPP connection of the
selected channel. The PPP connection will be restarted and new CHAP
or PAP values will be used.