Filter
Top Products
Installation
DRAFT
E Copyright Nokia Telecommunications Oy
NTC C33539002SE_A0
4-5
Here it is assumed that the default settings of M10 are suitable for
accessing the Internet through your Internet Service Provider, i.e. the
connection from M10 to the ISP uses PPP over AAL5 protocol, the ISP
provides the required network address information to your M10
automatically, and the default connection channel (VPI and VCI
values) of M10 is correct. This means that you only have to enable the
needed authentication method (CHAP or PAP) by clicking the relevant
radio button and to type in your username and password related to the
authentication method. You will get the information which
authentication method to use and your corresponding username and
password from your Internet Service Provider. After entering the
information click Save and restart M10.
Step 5b: Configure M10 (password enabled)
Enable PAP or CHAP authentication and type in your corresponding
user name and password. You will get the information which
authentication method to use and your corresponding username and
password from your Internet Service Provider. After entering the
information click Save and restart M10.