Filter
Top Products
Installation
DRAFT
E Copyright Nokia Telecommunications Oy
NTC C33539002SE_A0
4-25
Is the Ethernet connection working?
The front panel LAN LNK indicator is green if the Ethernet cable is
properly attached. If not, check that the cables are properly connected.
Check also that you are using a right kind of Ethernet cable. If you
connect your M10 directly to a PC, you should use a cross-connect
cable. If you connect your M10 to a HUB, you should use a direct
cable.
Is the ATM connection working?
You can check if the ATM connection is working by giving the
show
atm
CLI command. For the ATM connection to be functioning, the
ADSL connection must be working first. In case the ADSL connection
is OK but the ATM connection is not contact your service provider.
Is the PPP connection working?
If you are using PPP to connect to your service provider, you can also
check that your PPP connection is working. You can do this by giving
the
show ppp CLI command. If the ADSL link and ATM link are
working but the PPP link is not you should first check that the
username and password you are using on the PPP link are correct. You
can also try to restart the M10 (power-off and power-on) and check if
the connection is established. If these do not work contact your service
provider for help.