Filter
Top Products
Management
DRAFT
E Copyright Nokia Telecommunications Oy
NTC C33539002SE_A0
5-25
The only command you cannot truncate is restart. To prevent
accidental interruption of communications, you must enter the
restart command in its entirety.
You can use the
!! command to repeat the last command you entered.
You can press the Ctrl-P or Esc-k key sequences to obtain the same
result.
Root commands
You can get a list of the Root commands by typing
? in the Root
prompt.
D help command to get help
D configure command to configure unit’s options
D ping command to send ICMP Echo request
D atmping command to send ATM OAM loopback
D arp command to send ARP request
D quit command to quit shell
D reset command to reset subsystems
D restart command to restart unit
D show command to show system information
D telnet command to telnet to a remote host
D who command to show who is using the shell
D log command to add a message to the diagnostic log
D loglevel command to report or change diagnostic log level
D install command to download and program an image
into flash
D download command to download a config file
D upload command to upload a config file
D clear command to erase all stored configuration
information
The following tables present the Root commands, their detailed
descriptions, syntax and usage examples.