Filter
Top Products
Nokia M10 User’s Manual
DRAFT
E Copyright Nokia Telecommunications Oy
NTC C33539002SE_A0
5-20
5. Save the configuration.
You must save the new configuration. Save command takes you to
the M10 home page.
6. Restart your M10.
You must restart your M10 by clicking Restart M10 for your
changes to take effect.
5.1.8 Monitor page
You can get information about the status and statistics of the M10
through the Monitor page. The following links are available on the
Monitor page.
D Overview displays the basic identification information of M10.
D Memory displays the memory usage of M10.
D Show displays the Diagnostic log of M10.
D Reset scrolls the Diagnostic log window back to the first message.
D PPP displays status information about the IP/PPP interfaces.
D Ethernet displays status information of the Ethernet interface.
D ATM displays status information of the ATM channels.
D Interfaces displays status information of the active interfaces.
D Routes displays the routing table.
D ARP displays the ARP cache table.
D DHCP Server displays the DHCP server lease table.
D DHCP Client displays the IP address settings M10 has received
from the network.
D DSL displays the the status of the ADSL connection and statistics
about the connection.
D Table displays the bridge table
D Home returns to home page.
Figure 5-14 Monitor page