Filter
Top Products
Nokia M10 User’s Manual
DRAFT
E Copyright Nokia Telecommunications Oy
NTC C33539002SE_A0
5-4
QuickStart settings
Figure 5-3 QuickStart page
1. Change virtual path and channel identifiers if needed.
VPI and VCI are used to select the connection channel that is used
between M10 and the Internet service provider (ISP). Normally
you do not have to change these values.
2. Enable PAP or CHAP if needed. Enter the respective username
and password.
3. Enter local LAN Domain Name if required.
4. Enter Domain Name Server addresses if required. Normally these
are assigned automatically and the user should not fill these fields.
5. Save the configuration and restart M10.
You must save the new configuration and restart your M10 for
your changes to take effect.