Filter
Top Products
Management
DRAFT
E Copyright Nokia Telecommunications Oy
NTC C33539002SE_A0
5-77
Command Enable bridging on channels using PPP over ATM
encapsulation
Description Enables/disables bridging services for the Nokia M10
ATM channel using ppp-vcmux encapsulation.
Syntax set bridge wan {vccx} option [on|off]
Arguments The first argument identifies the ATM channel (vccx, x
= 1 ... 8) and the second argument enables/disables
bridging on that channel. If there is only one ATM chan-
nel using ppp-vcmux encapsulation you can leave the
argument vccx out.
Example m10> set bridge wan vcc2 option off
Command Enable bridging on channels using bridged encap-
sulations
Description Enables/disables bridging services for a Nokia M10
ATM channel using ether-llc or ether-vcmux encapsula-
tion.
Syntax set bridge dsl {vccx} option [on|off]
Arguments The first argument identifies the ATM channel (vccx, x
= 1 ... 8) and the second argument enables/disables
bridging on that channel. If there is only one ATM chan-
nel using either one of these encapsulations you can
leave the argument vccx out.
Example m10> set bridge dsl vcc2 option off
Command Enable/disable bridging between ATM VCC chan-
nels
Description Enables/disables bridging between ATM VCC channels.
If only one VCC is used this option can be ignored.
Syntax set bridge interwan-bridging [on|off]
Arguments The argument enables/disables bridging between
VCCs
Example m10> set bridge interwan-bridging
[on|off]