Filter
Top Products
Chapter 3 Using the console interface 135
Using the BayStack 420 10/100/1000 Switch
Table 26 describes the MultiLink Trunk Configuration Menu options.
MultiLink Trunk Configuration screen
The MultiLink Trunk Configuration screen (Figure 62) allows you to configure up
to six trunks in a standalone switch or stack. In a stack configuration, trunk
members can be distributed between any of the units within the same stack
configuration.
To open the MultiLink Trunk Configuration screen:
Table 26 MultiLink Trunk Configuration Menu options
Option Description
MultiLink Trunk
Configuration...
Displays the MultiLink Trunk Configuration screen (Figure 62). This screen
allows you to configure up to six MultiLink Trunks within a standalone switch or
within a stack configuration. You can group up to four switch ports together to
form each trunk.
MultiLink Trunk
Utilization...
Displays the MultiLink Trunk Utilization screen (Figure 63 and Figure 64). This
screen allows you to monitor the bandwidth utilization of the configured trunks.
Return to Switch
Configuration Menu
Exits the MultiLink Trunk Configuration Menu screen and displays the Switch
Configuration Menu screen.
Choose Trunk Configuration (or press t) from the MultiLink Trunk
Configuration Menu screen.