Nortel Networks 1000ASE-XD Switch User Manual


 
Chapter 3 Using the console interface 159
Using the BayStack 420 10/100/1000 Switch
Figure 73 Spanning Tree Port Configuration screen (2 of 2)
Table 36 describes the Spanning Tree Port Configuration screen fields.
Table 36 Spanning Tree Port Configuration screen fields
Field Description
Unit This field only appears if the switch is participating in a stack configuration. The field
allows you to select the number of the unit you want to view. To view another unit, type its
unit number and press [Enter], or press the spacebar on your keyboard to toggle the unit
numbers.
Port Indicates the switch port numbers that correspond to the field values in that row of the
screen (for example, the field values in row 2 apply to switch port 2). Note that the values
in the Switch row affect all switch ports and, when the switch is part of a stack, the values
in the Stack row affect all ports in the entire stack.
Trunk The read-only data displayed in this column indicates the trunks that correspond to the
switch ports specified in the Trunk Members fields of the Trunk Configuration screen
(see MultiLink Trunk Configuration Menu screen on page 133).