Filter
Top Products
204 Appendix E Default settings
209418-A
Monitoring Mode Disabled “Port Mirroring Configuration screen”
on page 139
Monitor/Unit Port Zero-length string
Unit/Port X Zero-length string
Unit 1 “Port Statistics screen” on page 141
Port 1
Console Port Speed 9600 Baud “Console/Comm Port Configuration
screen” on page 147
Console Switch Password Not Required
Console Stack Password Not Required
Console Read-Only Switch
Password
user
Console Read-Write Switch
Password
secure
Console Read-Only Stack
Password
user
Console Read-Write Stack
Password
secure
Note: The following two fields only appear when the switch is a participant in a stack configuration.
New Unit Number Current stack order “Renumber Stack Units screen” on
page 154
Renumber units with new setting? No
Unit 1 “Spanning Tree Port Configuration
screen” on page 158
Participation Normal Learning
Priority 128
Path Cost 10 or 100
Bridge Priority 8000 (read only) “Spanning Tree Switch Settings
screen” on page 161
Designated Root 8000 (bridge_id) (read only)
Root Port 0 (read only)
Root Path Cost 0 (read only)
Hello Time 2 seconds (read only)
Maximum Age Time 20 seconds (read only)
Table 56 Factory default settings (continued)
Field Default setting Appears in this CI screen