Filter
Top Products
OkiLAN 6200e Plus User’s Guide
TCP/IP 150
this command. If rlp is running (that is, if you see
output after executing this command), kill the pro-
cess with the command: kill -15 process_number.
3. Make sure the following entry is in the “/etc/
inetd.conf” file: printer stream tcp nowait root “/
usr/lib/ rlpdaemon” rlpdaemon -i If the rlp dae-
mon is not running when a print request is made,
this entry in “/etc/inetd.conf” will tell inetd to auto-
start the rlp daemon and service the pending print
request. This is helpful if the daemon died or was
terminated for some reason. For more information
on inetd or “/etc/inetd.conf”, type man inetd or
man inetd.conf.
4. Make sure the following entry is in the “/etc/ser-
vices” file: printer 515/tcp spooler
5. Start inetd by typing the following at the UNIX
prompt: /etc/inetd -c
Procedure
HP-UX uses an interactive utility called SAM (System
Administration Manager) to configure printing.
1. Login to the HP-UX system as root.
2. Invoke the SAM utility by typing sam at the UNIX
prompt. (We suggest you do this at the system
console. SAM uses a screen oriented interface that
works best at the console.)
3. Select the following options from the SAM menu:
Printers and Plotters -> Printers/Plotters -> Actions
-> Add a Remote Printer (Do NOT add a Network
Printer) A form appears asking you to define a
remote printer.