Filter
Top Products
OkiLAN 6200e Plus User’s Guide
TCP/IP 97
(Network_Print_Server_name:anyone):
<Enter>
230 User logged in.
ftp> binary<Enter>
200 Type set to I.
ftp> put chart.ps MPX1<Enter>
local: chart.ps remote: MPX1
200 PORT command successful.
150 Opening BINARY mode data
connection for MPX1.
226 Transfer complete.
4549 bytes sent in 0 seconds (4.4
Kbytes/s)
ftp> bye<Enter>
221 Goodbye.<Enter>
$
Timeout Checking
If timeout checking is enabled on the Network Print
Server, it closes any connection that stays idle for
more than five minutes. For example, if you open an
FTP connection to the Network Print Server and walk
away from your computer for more than five minutes,
the FTP connection will be closed. You can reestablish
a connection to the Network Print Server with the
OPEN command.
Raw Port Printing
Host computer software can use a raw TCP/IP port
connection to send data to the Network Print Server. A
TCP/IP port has been assigned to the output port of
the Network Print Server as follows:
TCP/IP Port: 9100