Filter
Top Products
OkiLAN 6200e Plus User’s Guide
Troubleshooting 194
• Verify that the printer is on-line and ready.
• Verify that the Network Print Server is configured
correctly.
• If you suspect any of the cables are bad, swap
them with cables you know are working.
Network Error Messages
Network range exceeded during router power up—
There are too many nodes on the network segment.
The Network Print Server cannot find a free node
number. Remove some of the other nodes on the net-
work or expand the network range for this segment of
the network.
Network Print Server Utility
Network Print Server does not show up in utility—
If the Network Print Server does not appear in the util-
ity, try the following:
• Print a configuration sheet for name and zone
information. Run the Chooser and select the cor-
rect zone.
• Verify that the Network Print Server is powered on
and appears in the Chooser. If not, refer to general
EtherTalk troubleshooting.
• Verify that the Macintosh you are using is running
Phase 2 EtherTalk.
• Compare the zone in which the Network Print
Server appears in the Chooser to the zones
searched. Search the same zone where the Net-
work Print Server appears in the Chooser.