Filter
Top Products
OkiLAN 6200e Plus User’s Guide
TCP/IP 87
ware address and IP address to a configuration file.
See your network documentation for instructions or
refer to Application Considerations.
Note: An IP address received from a RARP or
BOOTP server is not permanently programmed
into the Network Print Server. Therefore, if you
choose this method of assigning the IP address,
the RARP or BOOTP server must be available
every time the Network Print Server is powered on
or reset. The IP address can be stored perma-
nently using telnet, OkiNet for TCP/IP, or OkiNet
for NetWare.
A Winsock compliant BOOTP server is located on the
OkiNet for TCP/IP diskette. This has been provided for
users who do not have UNIX machines.
The IP address can also be set from Novell NetWare
using the OkiNet for NetWare utility.
Note: OkiNet for NetWare can only be used if Nov-
ell NetWare is installed on your network .
Verifying Access to the Network Print
Server
Use the ping utility to verify access to the Network
Print Server.
ping <IP address of Network Print
Server>
If the Network Print Server does not respond, your net-
work or the device is not configured correctly.