Filter
Top Products
OkiLAN 6200e Plus User’s Guide
TCP/IP 92
The entry should be similar to the following:
local_print_queue_name|[printer_model
_and_manufacturer]:\:lp=:mx#0:rm=Netw
ork_Print_Server_name:\:rp=remote_pri
nt_queue_name:\:sd=path_to_spool_dire
ctory:lf=just log_file_name
local_print_queue_name
The local_print_queue_name defines the name of the
printcap entry. It is used by the lpr/lpd utilities to spec-
ify which printcap entry is being referenced. Additional
printcap entries can be added as needed for different
queue types. Each entry must have a unique
local_print_queue_name and a different spool direc-
tory to work properly. When you are ready to print, use
the local_print_queue_name that matches the data
type of the file to be printed.
Network_Print_Server_name
This is the name (alias) of the Network Print Server.
This must be the same name as entered in the /etc/
hosts file or your NIS or DNS system. An IP address
may also be used here.
remote_print_queue_name
The remote_print_queue_name entry determines the
Network Print Server port where the print job will be
printed and optionally specifies ASCII printing.
path_to_spool_directory
This is the path to a directory where the print jobs will
be spooled for this queue. You must create a unique
spool directory for each printcap entry.