Filter
Top Products
OkiLAN 6200e Plus User’s Guide
TCP/IP 156
Configuring SCO UNIX for Printing with the
Network Print Server
This application note describes the configuration of the
printing system on the Santa Cruz Operation’s (SCO)
version of the UNIX operating system. For clarity and
brevity, the following specific names will be used to
represent general devices or concepts.
• lj4 - The local queue name of the SCO system to
which print jobs that are destined for a printer
attached to the Network Print Server will be
directed.
• OKIPRINTER - The host name of the remote sys-
tem which is the Network Print Server. For exam-
ple, to telnet to the Network Print Server and
invoke the Network Print Server Configuration util-
ity, you would type telnet OKIPRINTER. A host
name is not required for the Network Print Server,
the IP address may be used.
• yourqueuename - This is the name of the queue
on the Network Print Server and must end with 1,
2, 3 or 4 depending on the port selected to service
the print jobs. If FF, LF or NF are the last two letters
of the queue name, the job will be converted
accordingly. For more information, see Remote
Print Queue Names.
Prerequisites
Before you proceed, verify that the following prerequi-
sites are met:
1. SCO TCP/IP version 1.2 or later must be installed.