Filter
Top Products
OkiLAN 6200e Plus User’s Guide
Troubleshooting 192
• Verify that the AppleTalk type is LaserWriter.
• Verify that the Network Print Server has passed
self-test. The status indicator should be solid
green.
• Check the connections between the Network Print
Server and the Macintosh. When the Network Print
Server does not appear in the Chooser, it is often
caused by a cabling problem.
• Verify EtherTalk Phase 2 is selected in the Control
Panel.
Unable to Print from a Macintosh
If you are unable to print from a Macintosh via the Net-
work Print Server, try the following:
• Verify the Network Print Server appears in the
Chooser as a LaserWriter device. If the Network
Print Server does appear in the Chooser, make
certain it is selected.
• Make sure you are using System and Finder ver-
sion 6.02 or later and LaserWriter driver version
8.0 or later.
• Verify the printer supports PostScript Level 2 via
the printer test/ configuration sheet.
• If the status message Printer Error: Bi-Di communi-
cation on printer’s parallel port is not enabled
appears, verify your printer’s parallel port is a bidi-
rectional port and is enabled.