OkiLAN 6200e Plus User’s Guide
LAN Manager/LAN Server 168
3. Associate a print queue with the new local printer
port.
Once the installation is complete, you can verify com-
munication by printing a configuration sheet.
Network Preparation
• You must have network administrator privileges to
install the Network Print Server.
• You must have physical access to an OS/2 file
server to host the OKI software utilities.
• Write down the serial number and the Ethernet
address of your Network Print Server. You can find
the information on the test printout.
• OS/2 and LAN Manager/LAN Server must be con-
figured with the following protocol: DLC/802.2 pro-
tocol stack
• LAN Manager users must enable the remote boot
facility.
• LAN Server 2.X users must run the LAN Server
installation utility and select the 802.2 protocol.
• LAN Server 3.0 users must run the LAPS utility and
select the 802.2 protocol.
• OS/2 Warp Users must run the MPTS utility and
select the 80w.w protocol. See your network
administrator or the LAN Manager/LAN Server
manuals for instructions.
• The initial installation requires the file server to be
brought down and then back up again. This may be
a consideration when you are planning your install.